Blackspot Granular Treatment

The Vitalyse Black Spot Remover is a quality algaecide that is designed to keep your pool healthy. For best results, place the Vitalyse Black Spot treatment directly on black algae spots. Let it sit for 24 hours and brush.

Key Features and Benefits

• The Vitalyse Black Spot Remover Eliminates blackspot easily and quickly including root system.
• Easy to use.
• Slow dissolving so more effective.
• Suitable for plaster, tiled and pebblecrete pools.

Directions For Use:
Place product directly onto black spots or algae problem. Wait 24 to 26 hours then scrub with algae brush.

Caution:
Product may cause minor bleaching of pool surface dependant on the condition of surface.

General Instructions:
This product must be used with a registered sanitiser. Stabiliser levels MUST be tested fortnightly by your local pool shop or by the use of a reliable test kit. Once stabiliser levels reach 50mg/L DO NOT use this product until stabiliser levels fall below that level. UNDER NO CIRCUMSTANCES should stabiliser concentrations be allowed to exceed 100mg/L. If stabiliser concentration needs to be reduced, consult your local Poolwerx.

Safety Directions:
Highly reactive oxidising chlorine compound. May cause fire and explosion or produce severe burns. Product will irritate the eyes, nose, throat and skin. Avoid contact with the eyes, skin and clothing. DO NOT inhale dust. DO NOT allow product to come in contact with other chemicals, especially acids, or with combustible materials such as paper, fabric, sawdust or kerosene. DO NOT allow to get damp. Use clean containers for depressing. DO NOT mix other chemicals. DO NOT mix with different types of chlorinating chemicals. Mix with water only. DO NOT add water to the product - add the product to water. Store undercover in a dry, clean, cool well ventilated place away from sunlight. Store and transport in an upright container in case of spillage, flush with large quantities of water. Wash hands after use.