Vitalyse pH UP, rapidly increases the pool pH without affecting the total alkalinity. It also helps to prevent wrinkling of liners, etching of surfaces and eye irritation.
Vitalyse pH UP, increases the pool waters pH without affecting the total alkalinity. This convenient non toxic pack will also help to prevent eye irritation.
Directions:
Add pH UP to the pool water at the rate of approximately 100 grams per 50 000 litres of pool water to increase the pH by 0.1. Do not add more than 0.5 kilos per 50 000 litres at any one time. Run the filter for 4 to 6 hours, retest, and repeat the procedure if necessary.
Application:
Always test the pool water before adding pH UP to determine the correct dosage. For the best results the pH of the pool water should be maintained at approximately 7.4. Add the correct measure of pH INCREASE as a slurry mix directly to the pool, and run the filter for 4 to 6 hours to ensure complete dispersal.
Risk:
Harmful if swallowed. Risk of serious damage to eyes.
Safety:
Keep out of reach of children. Keep away from food, drink and animal feed. When using do not eat, drink or smoke. Avoid contact with eyes, skin and clothing. Wear suitable protective clothing, gloves and eye protection. Dilute with water only, and add the product to the water. Do not breathe dust. Do not mix with other chemicals. Keep in a cool, dry, ventilated area. Re-seal bag when in use.
First Aid:
If you feel unwell, contact the Poisons Information Centre, or a doctor. If swallowed, DO NOT induce vomiting. Immediately wash out mouth with water. Seek medical attention. In case of contact with eyes, rinse immediately with plenty of water and contact a doctor or The Poisons Information Centre. After contact with skin, wash thoroughly with soap and water. If irritation continues seek medical advice.
Warning:
May be fatal to children.
Other Poolwerx stores & mobile services nearby